企業簡介
林德納股份有限公司位于德國阿恩斯托夫,是高檔環保型裝飾裝修材料、天花板、地板、隔墻系統等產品的供應商,擁有超過40年的生產經驗。林德納在全球范圍內有超過40家的獨資子公司,在歐洲的每個國家例如英國、法國、荷蘭等都有子公司。業務活動遍布全球,在美國、俄羅斯等國家有優秀的銷售及項目團隊。員工總數超過5,500名。
林德納新型建筑材料(太倉)有限公司作為德國林德納股份有限公司的全資子公司,于2003年在江蘇太倉建立。主要產品有:金屬天花系統、制冷制熱技術、金屬包墻、金屬隔斷系統、玻璃隔斷系統、門框、聚酯粉末噴涂等,主要應用于機場、地鐵站等項目工程。為了更好地服務亞太地區的客戶,2007年上海林得納建筑裝飾工程有限公司成立,主要負責銷售和市場業務。
林德納竭誠歡迎您的加入。
招聘職位
1、倉庫管理員 1人 月薪 2000-2500 元
工作地點:太倉市
工作性質:全職
主要工作:任職要求:太倉本地人優先考慮;至少2年的倉管經驗;會開叉車,有叉車操作證;熟悉word,excel等辦公軟件;能看懂簡單的英語。
職位地址:http://74210.cn/zpxx_174545.html
2、Quality Supervisor/manager 1人 薪資面議
工作地點:太倉新區
工作性質:全職
主要工作:Summary Responsibility/職責綜述:
[網址不可見] in charge of the entire Quality department with respect to quality assurance, quality awareness, quality management, personnel, as well as safeguarding the compliance of the organization in according to the ISO 9001 and ISO 14001 management system. Especially focus on PPC pre-treatment to satisfy the requirement of environment.全面負責公司質量部門,以ISO9001及ISO14001體系為目標達成公司質量保證、質量意識、質量管理、公司組織等行為。特別注意噴涂車間的前處理工藝,以確保達成環境管理體系要求。
[網址不可見] and improve procedures and develop organizational measurements with regards to health, safety and environmental features. At the same time, take the responsibility of powder coating quality assurance, to make sure all Lindner’s coating quality can reach the related standards or requirements.程序的監控和改善,開發組織測量方法,以達到健康,安全型的環境。同時負責粉末噴涂的質量管控,以確認林德納的噴涂產品質量達到相關標準。
[網址不可見] planning, Budget Monitoring, preparing and discussing of monthly / quarterly quality reports is equally important.預算規劃,預算監控,每月/每季度質量報告的編制和討論。
Job responsibilities /工作職責:
1.Management work of the department, such as: personnel planning, selection, training and retaining of key people.本部門管理工作,如:人員計劃、選拔、培訓和留用;
[網址不可見] plan and control.部門預算的制訂及控制;
[網址不可見] Management System, including coordination, support and preparation of following works: a) Documented Procedures; b) Working Instructions; c) Check Lists; d) Forms; e) etc.負責質量管理體系,包括對以下工作內容的協調、支持和準備:a)文件形成程序;b)作業指導;c)檢查列表;d)表格;e) 其他
4.Consulting and support all parties involved in the QM Process regarding: a) preventive measurements;b) measurements to achieve process reliability; c) preparation of QM documents; d) official tests / checks, etc.為質量管理過程中涉及的各方提供咨詢和支持,包括:a) 防范對策;b) 實現過程的可靠性的測量;c) 質量管理文件的編制;d) 正式測試/檢查等;
5.Carrying out Management Reviews and Audits as well as respective documentation and analysis.審查和審計工作的開展,以及相應的文檔制作、審核,并進行分析;
[網址不可見] Management Planning (System, Product, Personnel, etc.)制作質量管理計劃(系統、產品、人員等);
[網址不可見] Representative of the top management; Coordinator of the quality representatives of the dif-ferent business units and departments 公司管理層的質量代表;協調各部門質量代表的工作;
[網址不可見] information to the top management about the situation on the Quality Management System. Support the top management with enforcement and implementation of corrective actions.向高級管理人員匯報質量管理系統情況;協調高層管理人員施行執行和糾正措施;
9.Detection of Quality Problems (quality assurance as well as organizational problems) and initiation of relvant actions to eliminate such problems質量問題的檢測(質量保證和組織問題),采取措施以解決問題;
10.Trainings arrangement in area of quality management and provide support.制定質量管理相關方面的培訓,并提供相應的支持;
11.Controlling Goods Income and productions “ongoing” inspections, especially double-check the quality of coating result including coating thickness, color difference and so on. To make sure all coating quality is controlled within the standards and avoid the client complaint. 負責進料檢驗及在線檢驗,過程檢驗尤其注意管控包括噴涂厚度,噴涂色差等噴涂結果質量,以保證噴涂產品的質量控制在標準內,避免客訴。
12.Responsible decision maker (in cooperation with the production manager) with respect to: 1) usability of the product; 2) reworking of the product; 3) scrapping of the product;同生產經理合作,做以下決定:1)產品的可用性;2)產品改造;3)產品報廢;[網址不可見] work assigned by GM. 總經理分配的其他工作。
其他要求:Qualifications Request /任職要求:
1.Bachelor degree with major in Mechanical manufacturing/Engineering/Business Administration or related.本科及以上學歷,機械制造、工程類、工商管理相關專業;
[網址不可見] of 5 years concrete quality management experience in manufacturing industry. 至少5年以上制造型企業的質量管理經驗;
[網址不可見] & Strategic thinking, good at organizing and evaluating information. patient, higher work efficiency under pressure with multitask.思路清晰,很好的組織及分析能力。有耐心,在壓力下能很好地多任務工作;
[網址不可見]-conscious有自覺的成本控制意識;
[網址不可見] communication & negotiation & interpersonal skills.很強的溝通協調、商務談判、與人合作能力;
[網址不可見] on own initiate, high moviated, high responsibility, reliable.積極主動、自我激勵、高度的責任感、具有良好的品行;
[網址不可見] team management and team work spirit, good at cross-function cooperation.良好的團隊管理及團隊合作能力、跨部門合作能力;
[網址不可見] English, both speaking and writing.英語流利;
[網址不可見] command of office software such as Word, Excel, PPT etc.熟練操作Word, Excel, PPT等辦公軟件。
職位地址:http://74210.cn/zpxx_187888.html
3、綠化養護員 1人 薪資面議
工作地點:太倉新區
工作性質:全職
主要工作:綠化維護
職位地址:http://74210.cn/zpxx_190454.html
4、CAD專員 2人 薪資面議
工作地點:太倉新區
工作性質:全職
主要工作:
1.Responsible to gather all necessary technical information from Sales Dept or Project Dept.負責從銷售部或項目部獲取盡可能全面的所有必須技術信息。
[網址不可見] design proposal with lay-out plan, elevation drawings and section drawings. Prepare detail design and bill of quantity.準備項目的設計平面圖、立體圖及剖面圖制作的設計方案;準備深化圖紙和材料清單。
[網址不可見] required technical tender documents such as system instruction, performance data, products certificate etc.提供必需的技術標書文件,如系統說明,性能參數及質量證書等;
4.Explanation of design proposal.負責解釋設計方案;
5.Complete drawings, and Bill of quantity 完成圖紙及材料清單;
[網址不可見] on-site measurements and support when necessary.對有必要的,執行現場測量及技術支持工作。
7.Cooperated with Technical Application Dep. to make sure new design or non-standard system is workable.與技術應用部門合作并確認新的設計或非標系統切實可行。
[網址不可見] non-standard system to Price Estimator if necessary. 如有必要,向報價人員解釋非標系統。
[網址不可見] the manufacturing drawings to production for non-standard systems向生產部提供非標系統的加工圖紙。
[網址不可見] charge of all drawing up-dates, filing of drawings and related technical documentation.負責所有圖紙的更新,并將圖紙及相關技術文件整理歸檔。
[網址不可見] work assigned by Manager.經理分配的其他工作。
要求外語:英語 良好
其他要求:
[網址不可見] or above degree in Architecture, Civil & Structure Engineering, Internal Decoration Design or equivalent etc, and holder of internal Decoration designer professional title are preferred.建筑,土木工程,內部裝潢設計等大?;蛞陨蠈W(xué)歷,有內部裝潢設計專業資格更佳。
[網址不可見] technical understanding.優秀的技術理解力。
[網址不可見] least 3 years experience in construction building interior design, 至少有3年以上建筑物內部設計經驗。
4.Proactive, responsible, good work management skill and can work independently.積極主動有責任心、良好的工作管理及獨立工作能力;
[網址不可見] communication and coordination skills, A good team player.良好的溝通協調能力,及團隊協作能力;
[網址不可見] at both written and spoken English. German is a plus.英文聽說讀寫熟練,會德語者優先考慮;
7.Professional in CAD專業的CAD技能[網址不可見] available for business trips if required for the projects.能因項目需要,適應出差安排。
職位地址:http://74210.cn/zpxx_191081.html
聯系方式
公司地址:太倉經濟開發區青島東路12號
企業電話:0512-53951000
招聘郵箱:lisa.wen@lindner-group.com.cn